Rubber Internal Mixer
The machine is mainly used for mixing and plasticating of rubber or plastics.
2.Main technical parameters
2.1. Total volume of mixing chamber 160L
2.2. The Working volume 110L (fill factor is by 0.75 )
2.3. Rotor type Two swing shear rotor
2.4. Drive direction the right hand（or up to the user）
2.5. Back rotor speed 4 ~ 40r/min, Ratio 1:1.16
2.6. Main motor rated power DC 500kW
2.7. Unit pressure applied by the ram on the stock 0.36 ~ 0.49MPa
2.8. Charging door of chamber 700 × 380mm
2.9. discharging door Chamber 700 × 280mm
2.10.The cooling water consumption ~ 45m3/h
2.11. Dimensions about 9000 × 4000 × 5260mm
12. Weight ~ 40t
3. Construction Features
3.1 Different type of rotors can satisfy the mixing technical requirement.
3.2 Rotor chamber, discharge door and ram are circulation-cooled. It can guarantee the quality of mixed rubber compound.
3.3 Touch surface of rotor, chamber, discharge door, ram and others contacting with mixing rubber is plated with chrome or wear-resistant hard metal.
3.4 Hydraulic type sealing structure guarantees the closed grain of the adhesive materials.
3.5 Upper ram is hydraulic or pneumatic pressure type, which can control the press continuously.
3.6 The floating weight is falling type, driven by gear and hydraulic oil tank with good sealing performance.
3.7 Various driving system satisfy the customers’ requirement.
3.8 Control system is adopted with PLC system.